유압 해머 천공기와 동적콘시험

영신컨설턴트 (02) 529 8803 ystcha@naver.com 2020 8

 

시축기의 접근이 어려운 곳의 천공 조사 시 유압 헴머로 천공하고 동적 콘 시험.

유압해머 무게 26kg 유압 138 bar 저소음

anti-vibration damped medium duty hydraulic breaker hammer weighs 26 kg

 

 

가솔린 엔진과 유압팩

The new petrol driven, 20lpm power-pack breaker market. 9hp Honda engine. Start up is by rope recoil and the engine throttle is controlled by Power on Demand (POD).

The unit is fully compliant to the latest noise regulations. This pack comes complete with a 7m hydraulic hose as standard and the anti-vibration damped medium duty breaker. Weighing 26 kg it is ideally used in utility, roads maintenance, repair of water and gas mains along with general contracting jobs.

 

 

25kg 가솔린 엔진

Hammering frequency: 1350 blows per minute

Hammering energy: 55 Joule per blow

Available output: 1.6 kW

Fuel consumption: 0.9 liter per hour

Fuel: 2-stroke gasoline (1:50)

Fuel tank: 1.8 liter

Displacement cm³: 80

 

 

동적 콘

Basic drop weight: 10 kg for DPL tests according to ISO 22476-2

Basic drop weight + 20 kg: 30 kg for DPM tests according to ISO 22476-2

Basic drop weight + 40 kg: 50 kg for DPH tests according to ISO 22476-2

Basic drop weight + 53.5 kg: 63.5 kg for SPT tests according to ASTM D1586 and AFNOR-B

 

 

공기식 동적콘 추 무게 10,30 kg, 무게 110kg

1 nr. - Pneumatic power-pack with a Honda four stroke gasoline engine and air-compressor

1 nr. - Hammering unit with 10 kg drop-weight and integrated air-cylinder

1 nr. - Additional drop weight of 20 kg for medium-heavy (DPM) dynamic penetration testing

1 nr. - Air hose with connectors

1 nr. - Connecting piece for connecting the hammering unit to the sounding tubes

1 nr. - Jack type tube puller

12 nr. - SPT/DPT sounding tube (22 x 1000 mm) with markings every 10 cm

12 nr. - Threaded nipple (stud) M16 x 50 for 22 mm sounding tubes

2 nr. - Conical sounding tip of tempered steel - 5 cm², M16 connection

2 nr. - Conical sounding tip of tempered steel - 10 cm², M16 connection

20 nr. - Conical sounding tip - 10 cm² - single use type

2 nr. - Open ended spanner 19 mm – heavy duty design for connecting the 22 mm sounding tubes

1 nr. - Allen key M8 for threaded nipples

2 nr. - Sturdy wooden transport case for transport and storage

 

sounding rod 1000 x 22mm sounding rod 1000 x 32mm sounding rod 1000 x 36mm

 

관입량 측정기