유압 해머 천공기와 동적콘시험

영신컨설턴트 (02) 529 8803 ystcha@naver.com 2020 8

 

시추기의 접근이 어려운 곳의 천공 조사 시 유압 헴머로 천공하고 동적 콘 시험.

 

 

25kg 가솔린 엔진

Hammering frequency: 1350 blows per minute

Hammering energy: 55 Joule per blow

Available output: 1.6 kW

Fuel consumption: 0.9 liter per hour

Fuel: 2-stroke gasoline (1:50)

Fuel tank: 1.8 liter

Displacement cm³: 80

 

 

동적 콘

Basic drop weight: 10 kg for DPL tests according to ISO 22476-2

Basic drop weight + 20 kg: 30 kg for DPM tests according to ISO 22476-2

Basic drop weight + 40 kg: 50 kg for DPH tests according to ISO 22476-2

Basic drop weight + 53.5 kg: 63.5 kg for SPT tests according to ASTM D1586 and AFNOR-B

 

 

공기식 동적콘 추 무게 10,30 kg, 무게 110kg

1 nr. - Pneumatic power-pack with a Honda four stroke gasoline engine and air-compressor

1 nr. - Hammering unit with 10 kg drop-weight and integrated air-cylinder

1 nr. - Additional drop weight of 20 kg for medium-heavy (DPM) dynamic penetration testing

1 nr. - Air hose with connectors

1 nr. - Connecting piece for connecting the hammering unit to the sounding tubes

1 nr. - Jack type tube puller

12 nr. - SPT/DPT sounding tube (22 x 1000 mm) with markings every 10 cm

12 nr. - Threaded nipple (stud) M16 x 50 for 22 mm sounding tubes

2 nr. - Conical sounding tip of tempered steel - 5 cm², M16 connection

2 nr. - Conical sounding tip of tempered steel - 10 cm², M16 connection

20 nr. - Conical sounding tip - 10 cm² - single use type

2 nr. - Open ended spanner 19 mm – heavy duty design for connecting the 22 mm sounding tubes

1 nr. - Allen key M8 for threaded nipples

2 nr. - Sturdy wooden transport case for transport and storage

 

sounding rod 1000 x 22mm sounding rod 1000 x 32mm sounding rod 1000 x 36mm